如何选择卫生间地面防水材料 |
添加时间:2018/12/13 14:56:08 浏览次数: |
如何选择卫生间地面防水材料
How to choose the ground waterproof material in the toilet
防水工程是家居装修中十分重要的环节,跟其它隐蔽工程一样,装修时很容易被业主所忽视。一旦防水工程没有做好,日后会发生渗漏,殃及邻里。如何做好卫生间防水,事关重要,那么应该如何挑选卫生间防水材料呢?一定要做墙面防水卫生间洗浴时水会溅到邻近的墙上,如没有防水层的保护,隔壁墙和对顶角墙易潮湿发生霉变。所以一定要在铺墙面瓷砖之前,做好墙面防水。一般防水处理中墙面要做30厘米高的防水处理,但是非承重的轻体墙,就要将整面墙做防水,至少也要做到1.8米高。
Waterproofing is a very important part of home decoration. Like other hidden projects, it is easy to be ignored by owners when decorating. Once the waterproofing works are not completed, leakage will occur in the future and bring disaster to the neighbourhood. How to do the toilet waterproof, the matter is important, then how should choose toilet waterproof material? Must do wall surface waterproof toilet bath water will splash to the adjacent wall, such as without the protection of waterproof layer, wall wall and the top corner wall easily humid. Therefore, wall tiles must be well protected before wall tiles. In general, waterproof treatment in the wall to do 30 centimeters high water treatment, but the weight of the light body wall, the whole wall to be waterproof, at least 1.8 meters high.
卫生间地面防水材料
Toilet ground waterproof material
新楼或二手房重铺地砖要做地面防水,更换卫生间原有地砖,将原有地砖凿去后,一定要先用水泥砂浆将地面找平,再做防水处理,这样就可以避免防水涂料因厚薄不均而造成渗漏。在做防水之前,一定要将地面清理干净,用聚氨酯防水涂料反复涂刷2至3遍。
The new building or second-hand housing tile to make ground waterproof, replacement of the original floor tiles in the toilet, after the original floor tiles are chiseled to, must first use cement mortar to the ground leveling, and then do waterproof treatment, so that the waterproof coating can cause leakage due to uneven thickness. Before making waterproofing, we must clean up the ground and use polyurethane waterproofing paint to brush 2 or 3 times.
传统水泥沙浆防水
Waterproofing of traditional cement mortar
把照1:3的分量进行调配的水泥沙浆灌入卫浴间的地面上,再按照从门高到出口水低的顺序,把水泥沙浆铺开,在给卫浴间做完基座处理后,再对地面进水防水涂料处理,最后才铺贴卫浴间地板砖。水泥沙浆防水是一种运用于家居装修的传统工艺,它具有造价低、使用广泛,而且性能稳定的特点。
The cement slurry, which is adjusted according to the 1:3 component, is poured into the ground between the bathroom, and then the cement slurry is spread out according to the order from the door high to the outlet water. After the base treatment is finished in the bathroom, the water waterproof coating on the ground is processed, and the floor tiles of the bathroom are put up at the end. Cement mortar waterproofing is a traditional process used for home decoration. It has the characteristics of low cost, wide use and stable performance.
性能特点
Performance characteristics
优:造价低,性能稳定;
Excellent: low cost, stable performance;
劣:用普通水泥沙浆做防水,容易给高层住宅造成一定的压力。
Poor: using ordinary cement mortar to make waterproof, easy to cause some pressure on high-rise residential buildings.
新型材料陶粒防水
A new type of material waterproofing
陶粒,又名粘土陶粒,是一种陶瓷质地的人造颗粒,综合强度高、防火性能好、具有耐风化等各项功能。目前广泛应该用于高层建筑中,可减轻高层建筑因装修施工而多加给楼层压力。
Ceramsite, also known as clay ceramsite, is a ceramic particle with high strength, good fire resistance and weathering resistance. At present, it should be widely used in high-rise buildings, which can reduce the pressure on the floors of high-rise buildings due to decoration works.
性能特点
Performance characteristics
陶粒颗粒均匀,强度高,表面多微孔,内部网纵横交错,不易板结,具有很强的吸附作用,使用寿命长。轻质,保温,吸音,无毒,无菌,无放射性,隔热效果好。
Ceramsite particles are uniform, high strength, porous surface, crisscross internets, difficult to harden, strong adsorption and long service life. Light weight, heat preservation, sound absorption, non-toxic, sterile, no radioactivity, good heat insulation effect. |
上一页 如何判定防水材料质量 |
下一页 防水施工须知的几大要点 |
Copyright © 技术支持:遨游网络